solar led pavement markers with shank CE RoHS IP68 approved aluminum led lane marker

  • Price:


  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:


  • Validity to:

    Long-term effective

  • Last update:

    2018-04-28 23:12

  • Browse the number:


Send an inquiries

Company Profile

Xi'an Lion Import & Export Co.,Ltd

By certification [File Integrity]






Product details
led pavement markers with shank CE RoHS IP68 approved aluminum led lane marker

1. Product Introduction of the solar led pavement markers with shank

road stud is flashing or steady solar-powered LED maintenance-free
lighting devices which used for road construction on edge and middle of
road. Embedded in the road surface, they are intelligent
devices compared with traditional cat's eyes that they may give drivers
more than a  reaction window compared with about 3 seconds for  reflective devices. The intensity of LEDs makes them easily visible at distances over 800m.

It is set along the road pavement,for night or rain and fog,Indicating the direction of road ahead,

the reverse reflective material, shell, solar panels, LED, control
devices,It is active light and passive reflective performance of the
visual induction facilities.

reflex brightness of ordinary reflective road stud is only 300-400
MCD,but the luminous brightness of solar spike up to 2000 MCD above,it
is 6-7 times the former.High-intensity light can go through rain and
rain at night,Safe and effective for the driver to guide the direction.

solar road stud flashing at some frequency in the evening,and human
vision is more sensitive to change,So its dynamic warning role is very
strong.Active lighting can not only avoid the maximum rain and rain
interference,And can be out of dependence on the car lights,Visual
distance farther,better results.Solar road stud in the rain and fog
weather and in the corners at the outline of the road,Induce driver's
attention And thus eliminate the security risks played a very important

2. Product Parameter(Specification) of the solar led pavement markers with shank

Body material

Aluminium alloy

Power supply

Solar panel(monocrystalline 2.5V/150MA for NI-MH battery;5V/60MA for lithum battery)


NI-MH 1.2V/600MAH, Lithium battery or Super capacitor(120F)


Ultra bright diameter 5mm;  4 or 6pcs(double side)

LED color


Working mode

Blinking or constant(flashing frequency 2Hz, also can be made according to your requirements)

Visual distance


Working hours

Fully charge at 8hours and can working 120hours continuously

Water proof


Life span

2years for NI-MH battery,5years for lithium battery,8-10 years for super capacitor

Load capacity




3. Product Feature And Application of the solar led pavement markers with shank


1.Highway, Villa, Landscape                            

2.Garden, Square, Street, Pathway, 
3.Road Delineation                                            

4.Accident black-spots / cluster sites
5.Hazardous road layouts                                

6.Areas adversely affected by poor visibility



1.Easy installation, no maintenance
2.Saves power, no additional expenses, environmentally friendly, no pollution
3.Can work more than 3 years normally
4.Solar energy-based power source
5.Brightness sensitive auto-switch, automatically turns on at night and turns off at dawn
6.It can load-bearing 20 tons
7.Waterproof and unbreakable: Solar panel, electronics and optics are fitted inside

4. Production Details of the solar led pavement markers with shank

5. Installation of the solar led pavement markers with shank

1.Before installation, solar road studs shall be charged under sunlight for 1 hr, to check the studs can work normally.
2. Placing
security isolation facilities for installation work is most important
and must not be ignored. In the whole process of dynamic construction,
no matter in an new closed road or a running road, every installers
shall be in the isolation area.

in a running road, the ratio between security personnel and the
installing personnel shall be 1:1; If in a closed road, 1:3.  
Locate the installing position and ensure it is flat. For curving,
cracked or uneven pavement, straighten it prior to installation. 
4. Clean the installation location with a brush, meanwhile ensure the location is dry. 
5. Glue the road stud thoroughly with proper amount of epoxy glue. 
6.  Firmly
mount the stud on the fixing location & ensure the reflective part
is facing the right traffic direction. Do clean the spilled epoxy glue
if excessive amount is used.
7. Inspect the installed studs within
2hrs after installation, ensuring that all the studs are fixed in
correct direction or not crooked.
8. Remove the isolation facilities in 4hrs after the stud’s installing glue is thoroughly cured.

6. Product Qualification of the solar led pavement markers with shank

7. FAQ


1. raised pavement markers

2. reflective pavement markers

3. reflective raised pavement markers

4. led pavement markers

5. solar pavement markers